Need help?Do you have a question about the VIPA SPEED7 CPU 313SC and is the answer not in the manual?
Comprehensive technical specifications for the CPU.
Steps for configuring the CPU using Siemens hardware configurator.
Procedure for configuring I/O modules in the hardware configuration.
Steps to configure the Ethernet interface for programming and control.
Details on setting CPU parameters via Siemens hardware configuration.
Configuration of VIPA-specific parameters for the CPU.
Methods for transferring projects to the CPU.
Description of the CPU's different operating modes.
Procedures for performing an overall reset of the CPU.
Instructions for updating the CPU's firmware.
Procedure to reset the CPU to its factory default settings.
List and explanation of VIPA-specific diagnostic event IDs.
Detailed information on counter functions and their configuration.
Explanation of the frequency measurement function and its operation.
Details on configuring and using Pulse Width Modulation (PWM).
Information on diagnostic and interrupt triggers and handling.
Explanation of Modbus function codes and naming conventions.
Steps for configuring the CPU for PROFIBUS communication.
Procedure for setting up the CPU as a PROFIBUS DP master.
Procedure for setting up the CPU as a PROFIBUS DP slave.
To Next Page
General