Need help?Do you have a question about the VIPA CPU 214 and is the answer not in the manual?
General| Type | CPU 214 |
|---|---|
| Number of timers | 256 |
| Number of counters | 256 |
| Digital Outputs | 16 |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Communication Ports | 1 |
| Communication | MPI |
| Interface | RS485 |
| Transmission rate | 187.5 kbit/s |
| Protocol | MPI |
| S7-compatible commands | Yes |
| Number of modules | 8 |
| Power Supply | 24V DC |
| Current consumption (with load) | 500 mA |
| Protection Class | IP20 |
| Weight | 500g |
| Operating Temperature | 0°C to 60°C |
| Processor | 32-bit |
| Number of flags | 256 |
Provides essential safety guidelines for handling electrostatically sensitive modules.
Guides through the process of configuring the CPU using Siemens SIMATIC Manager.
Explains the role and structure of Industrial Ethernet in automation systems.
Describes communication protocols like TCP/IP, UDP, and RFC1006.
Explains IP addressing structure, subnet masks, and network IDs.
Details communication types supported by the CP, like PG/OP communication.
Provides a quick guide to project engineering a CPU 21xNET.
Offers assistance with error diagnostics for network communication.
Illustrates a practical example of TCP/IP communication between CPUs.
Details the TCP/IP protocols, IP addressing, and TCP/UDP operation.
Covers CP configuration with WinNCS, hardware configuration, and PLC programming.
Guides through the hardware configuration process for the CPU and modules.
Explains PLC programming, synchronization, and block sizes for communication.
Introduces the TCPTest.exe program for creating and analyzing TCP/IP connections.
Guides through project engineering a CPU with an integrated Profibus-DP master.
Details the single steps for project engineering the CPU 21xDPM.
Outlines methods for transferring projects via MPI or MMC.
Details the operating modes of the DP master: STOP→RUN and RUN.
Covers commissioning steps and the CPU's start-up behavior.
Guides the configuration of the CPU 21xDP as an intelligent Profibus coupler.
Explains the project engineering process for the CPU 21xDP and its modules.
Explains parameter settings for the Profibus slave section of the CPU 21xDP.
Details Profibus-DP diagnostic functions for error detection and localization.
Provides guidelines for installing Profibus-DP networks, including structure and termination.
Covers commissioning steps for the CPU 21xDP and its peripherals.
Guides project engineering of the CANopen master using WinCoCT and Siemens tools.
Details supported protocols: ASCII, STX/ETX, 3964R, USS, and Modbus.
Describes the RS232C and RS485 interfaces and their connection pinouts.
Illustrates the data transfer principles using SFCs and FIFO buffers.
Explains parameterization using SFC 216 (SER_CFG) for different protocols.
Provides an example of Modbus communication between a master and slave.
Details ASCII, STX/ETX, 3964(R), and RK512 protocols.
Describes the RS232C interface properties, protocols, and connection pinout.
Guides on initializing interfaces using SFC 235 SYNCHRON in OB100.
Details parameter transfer using SFC 230 SEND and SFC 234 RESET.
Explains communication via SEND, RECEIVE, FETCH, and CONTROL blocks.
Lists and describes integrated standard system functions (SFCs).
Details VIPA-specific SFCs, their assignment to CPUs, and library inclusion.
Explains the SFC 216 for RS232C parameterization, including protocols and parameters.
Describes the SFC 217 for sending data via RS232C interface, including parameters.
To Next Page
