VIPA CPU 214 User Manual

Manual VIPA CPU 21x Chapter 6 Deployment of the CPU 21xDPM
HB103E - Rev. 05/45 6-1
Chapter 6 Deployment of the CPU 21xDPM
Content of this chapter is the deployment of the CPU 21xDPM under
Profibus. After a short introduction into the Profibus system, the project
engineering and the usage under MPI is shown.
This chapter ends with information to the operating modes of the DP
master and to the commissioning.
The following text describes:
• Principles of Profibus-DP
• Proyect engineering of a CPU 21xDPM
• Deployment of the MPI-interface and MMC
• Operating modes of the DP master
• Commissioning
Topic Page
Chapter 6
Deployment of the CPU 21xDPM....................................6-1
Principles..............................................................................................6-2
Project engineering CPU with integrated Profibus-DP master..............6-5
Project transfer.....................................................................................6-9
DP master operating modes...............................................................6-12
Commissioning and Start-up behavior................................................ 6-13
Outline
Content

VIPA CPU 214 Specifications

General

Type	CPU 214
Number of timers	256
Number of counters	256
Digital Outputs	16
Analog Inputs	4
Analog Outputs	2
Communication Ports	1
Communication	MPI
Interface	RS485
Transmission rate	187.5 kbit/s
Protocol	MPI
S7-compatible commands	Yes
Number of modules	8
Power Supply	24V DC
Current consumption (with load)	500 mA
Protection Class	IP20
Weight	500g
Operating Temperature	0°C to 60°C
Processor	32-bit
Number of flags	256