8
VIPARSPECTRA 1/8'' Adjustable Rope Hanger
Installation Instruction:
Adjust to the desired height by simply pulling the loose rope end.To release,
hold the loose rope end and depress the lever recessed in the Rope Hanger.
7
PART II Installation Instructions
1. Remove this lighting equipment from packaging.
2. Joining the buckles to the hanging holders one by one.
3. Hanging the light on a hard, stable bracket or the ceiling of grow tent with the carabiner.
4. Install this lighting equipment above your plants - Do not proceed unless it's safely and
securely mounted.
5. Plug power cord into this lighting equipment (do not plug into wall yet).
6. Rotate counterclockwise to turn off the dimmer knob.
7.
INSTALLATION
ROPE HANGER INSTALLATION
Rope hanger
Power on this lighting equipment by plugging into wall socket and turn on the dimmer knob.
To Next Page
Loading...
