EasyManua.ls Logo

Viper 3103V - Disarming Diagnostics

Viper 3103V
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The security system continually ignores the zone that was active
until the input stops. 3-seconds after the input stops, the system
monitors that input normally.
For example, if your vehicle has interior light exit delay and you
arm it before the interior light goes out, you may hear Bypass
Notication chirps. Once the light shuts off, the doors are monitored
normally.
Disarming Diagnostics
Ex
tra disarm chirps are known as Tamper Alerts. If four chirps are
heard when disarming, the system was triggered in your absence. If
ve chirps are heard, a zone was triggered repeatedly, and the
Nuisance Prevention Circuitry bypassed that zone (see NPC section
of this guide).
Th
e in-vehicle status LED indicates which zone was involved. (See
Table of Zonessection of this guide.) The system retains this
information in its memory and continues to chirp four or ve times
each time it is disarmed, until the next time the ignition is turned on.

Related product manuals