To Next PageTo Next Page
Need help?Do you have a question about the Viper 3121V and is the answer not in the manual?
General| Brand | Viper |
|---|---|
| Model | 3121V |
| Category | Security System |
| Language | English |
Procedure for adding or replacing remote transmitters for the system.
Instructions on how to arm the security system and its activation status.
What happens when the ignition is turned on while the system is armed.
Steps to bypass the tilt sensor after arming the system.
Steps to bypass both tilt and shock sensors after arming.
Procedure for disarming the security system and its response to prior alarms.
Information on the automatic re-arming feature after disarming.
Instructions to activate the panic mode for attracting attention.
Procedure to disarm the system if the remote is not working or lost.
Explanation of Valet Mode, which prevents automatic arming.
Guide to accessing and configuring various system features.
Step-by-step guide for replacing the battery in the remote control.
Guidance on proper disposal of batteries according to municipal requirements.
Description of the blue wire's function as a trigger input.
Explanation of the violet/white wire for closed loop sensor protection.
Details on the red/white wire for controlling auxiliary functions.
Information on using green wires for starter kill input/output.
How to connect the white wire to the vehicle's parking lights.
Using the white/brown wire to set parking light flash polarity.
Connection of the red wire for constant 12V power supply.
Proper grounding procedure for the black wire.
Instructions for the black/white antenna wire connection and placement.
Connecting the brown wire for siren output or horn control.
Connecting the yellow wire to the vehicle's ignition source.
RF exposure compliance requirements for remote controls.
RF exposure compliance requirements for the control center.
