EasyManua.ls Logo

Viper 3121V - Aux; Auto Re-Arming; Panic

Viper 3121V
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
© 2017 Directed. All rights reserved.
times to indicate the last zone that was triggered when the system
was armed.
Table of Zones
Parking Light Flash System Triggered Zone
4 times Tilt/Shock sensor triggered
5 times Instant triggered
6 times Loop wire triggered
7 times Ignition triggered
Aux
Press and release
A U X
and
A U X
. An optional auxiliary function, such
as lighting or radio turn on, can be controlled by pressing these
buttons. By default, the aux channel sends a 1-second pulse on
the aux wire. This can change to a latched output that stays on
when the command is sent, and then turns off when the command
is sent again.
Auto Re-Arming
Note: This is an optional feature that needs to be turned on. See
“Feature Settings” on page 8 for more information.
After disarming and no ignition activity, the system will re-arm after
60 seconds. During the 60 second countdown, the LED will flash
quickly. When the system re-arms, the siren will chirp and the
parking lights will flash once.
Panic
If you are threatened near your motorcycle, you can attract at-
tention by triggering the system with your transmitter. Just press
A U X
for 2 seconds to enter panic mode. The siren will sound for 10

Related product manuals