• Power Saver when the system is armed: After the system
has been armed for 24 hours, the in-vehicle LED will flash
at half its normal rate, decreasing the system’s current
draw.
• Power Saver in Valet Mode: When the system enters Valet
Mode the in-vehicle LED illuminates steadily. If the
vehicle is not used (ignition is not turned on) for a period
of one hour while the system is in Valet Mode, the LED
will shut off. If the system remains in Valet Mode, the LED
will come back on the next time the ignition is turned on
and then back off.
To Next Page
Loading...
