Need help?Do you have a question about the Viper 5606V and is the answer not in the manual?
General| Remote Start | Yes |
|---|---|
| Two-Way Communication | Yes |
| Range | 1 mile |
| Channels | 5 |
| Shock Sensor | Yes |
| Keyless Entry | Yes |
| Panic Mode | Yes |
| Number of Buttons on Remotes | 5 |
| Number of Remotes Included | 2 |
| LCD Display | Yes |
| 2-Way Paging | Yes |
| Starter Kill | Yes |
| LCD Remote | Yes |
| SmartStart Compatible | Yes |
| Battery Backup Siren | Yes |
| Dome Light Supervision | Yes |
| Valet Mode | Yes |
| Parking Light Flash | Yes |
| Horn Output | Yes |
| Remote Trunk Release | Yes |
| Remote Window Roll-Up | Yes |
| Diesel Support | Yes |
| Turbo Timer | Yes |
| Temperature Sensor | Yes |
| Tach Sensing | Yes |
| Voltage Sensing | Yes |
| Ignition-Controlled Door Locks | Yes |
| Includes Installation Parts | Yes |
| Smartphone Control | Yes |
| Runtime Settings | Configurable |
| System Type | Security and Remote Start System |
Instructions on how to arm the vehicle security system.
Instructions on how to disarm the vehicle security system.
Crucial safety warnings and precautions to be read before operation.
How to arm the system without audible siren feedback.
How to disarm the system without audible siren feedback.
Procedure to bypass vehicle sensors for specific situations.
Instructions for entering and exiting Valet Mode.
Arms system silently with sensor bypass functionality.
Details on the Smart Start feature for automatic engine starting.
Arms system silently with full sensor bypass.
Steps to enter and exit the system's programming mode.
Explanation of system arming status and starter kill functionality.
Details sensor trigger behavior during silent arming modes.
Details sensor trigger behavior during full silent arming.
Describes the system's response to a full alarm trigger event.
Procedure to disarm the system without a remote.
Specific procedures for setting up the system in manual transmission vehicles.
Recommendation for professional installation by an authorized dealer.
Information regarding the vehicle's capability for remote start.
Specific operating procedures and precautions for manual transmission vehicles.
Procedures for diagnosing and reporting remote start issues.
Step-by-step guide for pairing a remote control with the system.
To Next Page
