Do you have a question about the Viper 650XV and is the answer not in the manual?
Remote Start | Yes |
---|---|
Two-Way Communication | Yes |
Range | Up to 1 Mile |
Keyless Entry | Yes |
Panic Mode | Yes |
LED Status Indicator | Yes |
Number of Buttons on Remotes | 5 |
Number of Remotes Included | 2 |
Remote Range | Up to 1 Mile |
Keyless Entry Features | Yes |
Starter Kill | Yes |
SmartStart Compatible | Yes |
Dome Light Supervision | Yes |
Valet Mode | Yes |
System Type | 2-Way Security & Remote Start System |
Shock Sensor | Yes |
Alarm Features | Shock Sensor |
LCD Remote | Yes |
Diagram showing wire connections for the primary harness.
Detailed instructions for connecting wires in the primary harness.
Details the connections for the 3-pin door lock harness.
Information about the Super Bright LED and its connection.
Details on the Valet/Program switch and its installation.
Information on the programmer interface port.
Guidance on optimal placement for the receiver/antenna.
Information on the 4-pin shock sensor harness and its inputs.
Explains the function and settings of the light flash jumper.
How to temporarily bypass sensor inputs to the unit.
Procedure for learning and programming system features.
Lists and describes basic system features.
Lists and describes advanced system features.
Detailed descriptions of basic system features.
Detailed descriptions of advanced system features.
Process for adding transmitters and programming buttons.
How standard remote transmitters are configured.
How single-button remotes are configured.
System status indications during arming/disarming.
Table of siren chirps and their meanings.
Mapping of zones to trigger types and inputs.
How the system stores recent trigger events.
Allows selection of active sensors during arming cycles.
Optional feature for disabling vehicle during carjacking.
Prevents repeated triggering of the same zone.
Ensures system returns to previous state after power loss.
Solutions for common system problems.
A quick reference for wiring connections.