Residential Sliding Gate
Operator
3
Description of your SLIDE Gate Opener
FEATRUES
• Weather proof casing
• Reliable magnetic limit switches for accura te open and close gate positions.
• Self-locking gear motor in both open and close positions.
• 300 mhz receiver.
• 2 year limited warranty on motor
• 1 year limited warranty on manual & electric parts
SAFETY
Electric Safety monitor will stop and reverse gate to open position if it senses an
obstruction while gate is closing.
• Release-key to open gate manually in case of an em ergency (ie: power failure, fire, etc.).
• Electronic anti-entrapment system, operable in both the open and closing directions.
• Enclosed chain cover for added protection.
SPECIFICATIONS
Table 1, SLIDE GATE OPENER Specification
Motor Safety
Type Permanent split
capacitor, oil bath
Personal Push button remote,
auto reversal
Speed 1470 RPM Electronic Independent up/down
force adjustment
Volts 120 VAC ± 10% 60 Hz El ectrical Moto r overload
protection
Current Less than 6 Amps Start Circuit 24 V push button or
remote sensor.
Operating Temp.
-22/158 ° F (-30/70 ° C)
Emergency Clutch release Key
Torque 15 N.m
maximum
Drive Mechanism Dimension
Gears 1:30 Ratio Length (overall) N/A
Drive Chain gear type Ship Weight 58 lbs.
Length of Travel 25 ft max. by magnetic
Limit Switch
Chain Length 25 ft.MAX, ANSI
chain No. 41
Travel Rate 11” per second. Gate Size 25 ft. (Maximum)
Gate Weight (max.) 800 lbs. (Maximum)
To Next Page
Loading...
