Viper TC-3 User Manual

Residential Sliding Gate Opener
(Magnetic L i m it Switch – Chain type)
Installation and Owner’s Manual
For Residential use only – Class 1
( A Ve hic ula r ga t e op e r a tor int e nd e d for use in a s ingle f a m i l y dwe l l i n g )
Made in the U.S.A.
: N O I T U A C E S A E L P D A E R S I H T L A U N A M Y L L U F E R A C
GATEMOTORS INC.
Email: GATEMOTOR@YAHOO.COM
WWW.GATEMOTORS.COM
This Product meets and exceeds the requirements of UL 325, the standard which regulates
gate operator safety, as established and made effective March 1, 2000, by Underwriters Laboratories Inc.

Viper TC-3 Specifications

General

Number of Remotes	2
IP Rating	IP44
Control Type	Remote control
Safety Features	Obstacle Detection
Operating Temperature	-4°F to 122°F

Summary

Installation and Owner's Manual

Safety Alert Symbols

Description and Specifications

Specifications

Details the technical specifications of the SLIDE Gate Opener, including motor, safety, and drive mechanism details.

Tools you will need

MAKING THE CONNECTION

AC SLIDE GATE CONTROLLER

Feature Selector DIP Switches

Explains the function of DIP switches on the control board for features like auto-close and gate direction.

Anchors and Operator Base Installation

Operator Base Mounting

Instructions for mounting the gate operator base to the concrete pad, ensuring proper leveling and distance.

Chain Brackets

Chain and Limit Switch Setup

Magnets for Limit Switch Installation

Guides the installation of magnets and limit switches to control gate open and close positions.

Electrical Preparation

Gate Operator Mechanical Installation

Gate Operator Electrical Installation

Optional Mechanical Installation

Limit Switch Sensor Details

Manual Release Operation

Optional Equipment Installation Procedures