Virax VIPER P22+ - VIPER P22+ Technical Data; Main Safety Warnings for VIPER P22+; Work Zone Safety Guidelines

18
Caption
The tool bears a label describing special signs. These provide important information about the product or instructions of use.
Compliance with European safety standards. Read the original manual.
Wear glasses. Wear gloves.
2 Technical data
NOTES:
Carefully read the instructions before using this tool.
The manufacturer reserves the right to improve his products and change their specifications without
special notice.
The specifications may vary according to the country.
3 Main safety warnings for the tool
WARNING:

electric shock, fire and/or severe injury.

the warnings, the term « tool » refers to your power tool supplied by battery.
3.1 Work zone safety

AND PROPERLY LIT AT ALL TIMES.
Poorly lit or cluttered zones are sources of accidents.
Model
VIPER P22+
Reference
253620
Force delivered by the machine to guarantee crimping
Min 32 kN; Max.35 kN
Battery supply
14.4V DC 2.5 Ah Li-ion 36 Wh
Power absorbed
300 W
Crimping capacity:
For PER / PEX tubes:
Ø 12 to Ø 32 mm.
For Multilayer tubes:
Ø 12 to Ø 110 mm.
For steel tubes (stainless steel or galvanized):
Ø 12 to Ø 54 mm.
For copper tubes:
Ø 12 to Ø 54 mm.
Crimping cycle time:
For dimensions Ø12 - Ø40 mm
3-6s
For dimensions Ø40 - Ø110 mm
7-9s
Jaw rotation
320°
Weight (without battery ; without jaw / with battery ; without jaw)
3.6 / 4.2 kg
Machine size with battery ; without jaw
length / height / width (mm)
408 / 321 / 85
Dimensions of the case  length / height / width (mm)
594 / 494 / 149
Safety disengagement
Yes: electronic
Information on sound and vibration emissions
Sound emission:
Acoustic pressure level at operator ears: LpA
78 dB (A)
Peak acoustic pressure level at operator ears: LpCrête
94 dB (C)
Acoustic power level: LwA
85 dB (A)
Uncertainty KpA
2.5 dB
As per standard NF EN ISO 15744  tests on work cycles without part
Vibration emission
Weighted hand-arm acceleration values m/s²
On the trigger
0.54 m/s
Second hand at front
0.76 m/s
Estimated uncertainty
As per standard NF EN ISO 20643  tests on work cycles without part
0.2 m/s