20
OF CHILDREN. DO NOT ALLOW
PERSONS NOT KNOWING THE TOOL
OR THESE INSTRUCTIONS TO USE
THEM.
INSTRUCTIONS. CHECK THERE IS NO
MISALIGNMENT, BLOCKING OF
MOVING PARTS OF BROKEN PARTS
BEFORE USE.
Many accidents are due to poorly maintained tools. Any protection,
switch or other part damaged or faulty must be repaired or changed
by a skilled technician.
USE THE TOOL AND ACCESSORIES
AS PER THESE INSTRUCTIONS,
WHILE CONSIDERING THE WORK
CONDITIONS AND WORK TO BE
PERFORMED.
Using the tool for operations different from those planned may lead
capacity, while considering the work conditions and tasks to be
performed. Using the machine for users other than those planned is
hazardous and cancels all guarantees.
CONSIDER THE WORKING
ENVIRONMENT.
Do not expose power tools to rain nor store them in a damp or wet
location.
USE ONLY ACCESSORIES
RECOMMENDED BY VIRAX FOR YOUR
MODEL.
Non observance of this instruction may present a danger for the
user and cancels the guarantee.
3.5 Maintenance and servicing of the tool
MAINTAIN YOUR TOOL CAREFULLY.
Keep your tools clean to ensure proper operation.
Clean and grease the rollers regularly.
THE HANDLE MUST BE CLEAN AND
WITHOUT OIL.
Maintain the tools clean to ensure safe handling.
HAVE YOUR TOOL MAINTAINED BY
AN APPROVED REPAIR SHOP USING
ORIGINAL SPARE PARTS.
Non observance of this instruction may present a danger for the
user and cancels the guarantee.
4 Specific safety instructions
Always wear hearing protections when working with the tool. Noise emitted may cause hearing troubles.
During work, wear protection glasses to avoid projections.
WARNING: Always keep your fingers and hands away from the jaw during the crimping cycle. Non compliance
with this instruction may cause severe injuries.
4.1 Precautions of use of the crimping machine
CHANGE THE ACCESSORIES
WITHOUT DISCONNECTING THE
BATTERY.
Omitting to disconnect the crimping machine battery before
adjusting or changing the accessories may cause severe injuries.
DO NOT USE THE TOOL WHEN ITS
BATTERY IS DAMAGED.
A damaged battery increases the risk of electric shock.
THE JAW PROFILE.
Inserting your fingers in the jaw profile may cause severe bodily
injures.
DAMAGED JAW.
A modified jaw can break under pressure during the crimping cycle.
Throw and replace the complete jaw.
DURING WORK, HOLD THE TOOL
WITH BOTH HANDS AND MAINTAIN
YOUR BODY IN A STABLE POSITION.
The tool is better guided when held with both hands.
When working in high places, check nobody is below you.
WARNING:
To Next Page
Loading...
