Page 26 of 36
communications channels between the remote server and the local machine.
• Firewall settings are for advanced users and network administrators.
• Press the Help icon to get in context tips.
SETTINGS > FIREWALL > SYSTEM SECURITY
• Enable or Disable Remote Management (via WAN) and PING
• Firewall settings are for advanced users and network administrators.
SETTINGS > FIREWALL > UPNP
• Universal Plug and Play is a set of networking protocols that permits networked
devices, such as personal computers, printers, Internet gateways, Wi-Fi access
points and mobile devices to seamlessly discover each other's presence on the
network and establish functional network services for data sharing,
communications, and entertainment.
• UPnP is enabled by default on the LAN side (local) but if you require extra
security you should disable this setting.
• UPnP is not enabled on the WAN (Network) side.
• Firewall settings are for advanced users and network administrators.
SETTINGS > FIREWALL > DMZ
• Enable the DMZ Setting to open up all ports from the WAN side (mobile network)
to the LAN side for this particular allocated IP address.
• It is advisable to set a Static IP address for this device outside of the DHCP range
eg 192.168.0.20
To Next Page
Loading...
Need help?
General