VIRTUFIT CTR 1.2i - Assembly Instructions

To Next Page

To Previous Page

VirtuFit CTR 1.2i Crosstrainer











03&6

G53&6

03&6

6







STEP 1

Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and

the device. Some parts (bolts, screws, etc.) are already attached to/in the device.

Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and

must remain straight. Do you receive an error message after mounting your device? Then you have to

straighten these aluminum legs again, this may cause the error message to disappear.

Socket screws: The device contains socket screws, make sure that the allen key is firmly in the

bolt before you apply force to the key. In this way you prevent the head of the socket head screw from

being rotated.

Transport wheels: Make sure that the transport wheels are attached to the front of the appliance.

• Attach the Front Stabilizer (35) and the Rear Stabilizer (36) to the Main Frame (40) with Carriage Bolt

(33), Domed Nut (23) and Arc Washer (22).

ASSEMBLY INSTRUCTIONS