COMPUTER INSTRUCTION
OPERATION
9. Body Fat Mode
(1) During STOP pressing FAT KEY can operate fat measurement. Then entering U1-U4 for 2 seconds. (2)
After receiving HR signal would start operating.
(3) After 8 seconds would display BMI, FAT%, fat or skin icons.
10. Recovery Mode
During START or STOP input the HR signal and display the value, then pressing the RECOVERY KEY to
operate.
The matrix only displaying time and pulse. Time would count down from 60 seconds and the pulse
shows the real HR value. During or end testing pressing RECOVERY KEY to back to last display.
And after testing continue display real HR value.
To Next Page
Loading...
