ENGLISH
EN
07
CAUTION! Regular maintenance will extend the life of the treadmill
and prevent injury!
CONTROL PANEL
TIME
CAL.
SPEED DIST.STEP
Functions
• TIME Has two display modes:
Standard Mode: Counts from 00:00 ~ 99:59 and resets to 0 when
99:59 is reached.
Manual Mode: Set a time for the duration of the workout. Once
the countdown reaches 0, the device stops slowly and switches
to standby mode.
• STEP Displays the steps (0 ~ 9999 steps). When 9999 is reached,
it counts again from 0.
• DISTANCE Has two display modes:
Standard Mode: Counts from 0.0 ~ 99.9 km and resets to 0 when
99.9 km is reached.
Manual Mode: Set a distance for the workout and the distance
counts down to 0 km. Once the countdown reaches 0, the device
stops slowly and switches to standby mode.
• CALORIES Has two display modes:
Standard Mode: Counts from 0 ~ 9999 and resets to 0 when
9999 is reached.
Manual Mode: The user can set the calorie value. Select between
20 and 990. Once the countdown has reached 0 reached, the
device stops slowly and switches to standby mode.
NOTE! The default mode displays DISTANCE and CAL. Press
the "M" button to switch between standard mode and manual
mode.
• SPEED Displays the speed (0.8 km/h~8.0 km/h). In the preset
mode, 20 preset programmes are displayed (P1 ~ P20) are
displayed.
not be too loose. To avoid abrasion between the roller and
the treadmill and to ensure proper operation of the machine,
the treadmill should not be too tight. The distance between
the step and the belt can be adjusted. The distance between
the step and the belt should be 50 to 75 mm on both sides.
Cleaning
General cleaning of the unit will extend its life. Keep the appliance
clean by dusting it regularly. Regular maintenance will prolong the life
of your appliance and prevent injuries! For more information, please
visit https://www.virtufit.nl/service/faq/
CAUTION!
Wear clean shoes to reduce the risk of soiling the
machine. At least once a year, remove the cover to remove dust.
LUBRICATING THE TREADMILL
The treadmill is equipped with a low-maintenance, pre-lubricated
treadmill. Wear and tear on the treadmill plays an important role in the
operation and life of the treadmill, so it should be lubricated periodically.
We recommend that you inspect the belt regularly. Contact us as soon
as you notice any damage to the treadmill.
Recommended lubrication of the treadmill
• Low usage (less than 3 hours per week): once a year.
• Medium use (3 to 5 hours per week): every six months.
• Heavy use (more than 5 hours per week): every three months.
As a general rule: Lubricate if the mat appears dry. If in doubt, contact
the manufacturer. The use of Vaseline (acid-free) or silicone oil is
recommended for lubricating the treadmill.
Instruction
• Lift the mat.
• Apply two to three drops of silicone oil along the length of the
treadmill.
• Turn on the treadmill and run for three minutes without
stressing the treadmill (i.e. without standing on the treadmill).
To Next Page
Loading...
