Vision 2448 Installation Guide

© 2020 Vision Engraving & Routing Systems
Vision 1612, 1624, 2424 and 2448
Series 5 Installation Guide
Revised: 5/14/2020Part number 12-1087-01
This is ONLY the Installation Guide.
PLEASE review the complete User
Manual for your machine, which will be
installed on your computer after the
software installation is completed.
Red Dot Laser Pointer Offset
X__________ Inches__ mm__
Y__________ Inches__ mm__
Braille Inserter Offset
X__________ Inches__ mm__
Y__________ Inches__ mm__
Factory Settings

Vision 2448 Specifications

General

Cooling Method	Water Cooling
Laser Power	40W
Laser Type	CO2
Resolution	1000 DPI
Power Supply	220V / 110V
Engraving Area	600 x 900 mm
Work Area	600 x 900 mm