Need help?Do you have a question about the Vision 2448 and is the answer not in the manual?
General| Cooling Method | Water Cooling |
|---|---|
| Laser Power | 40W |
| Laser Type | CO2 |
| Resolution | 1000 DPI |
| Power Supply | 220V / 110V |
| Engraving Area | 600 x 900 mm |
| Work Area | 600 x 900 mm |
Essential safety guidelines and warnings for operating the engraving machine.
Details computer hardware/software, electrical, and facility needs for the Vision system.
Guidance on selecting a location and understanding installation layout diagrams for the engraver.
Details controller ports and step-by-step pendant holder installation.
Guides through setting up the computer's network connection for the Vision system.
Procedure for installing the Vision Mov UI software, including prerequisites and driver setup.
Instructions for installing specific versions of Vision software, such as Vision Pro 10.
Ensures the Vision Mov UI spooler program is running and connected before operation.
Explains the functions of the pendant for controlling machine movement and operations.
Explains the purpose and operation of the emergency stop button to halt machine functions.
Details navigation and use of Setup, Run, and Adjust screens for job management and parameter tuning.
Covers Set XYZ, Job Select, Search, Origin, and Surface location for preparing jobs.
Details system utilities, surface setting, home procedure, and controller maintenance.
Details setting up jobs in Vision software and sending them to the machine, including tool configuration.
Instructions on how to remove, clean, and replace the controller's input fan filter.
Explains how to use the Measure Feature to set home position and plate size in Vision software.
To Next Page
