7. Usage
7-1) Startup
- Check if the car engine is turned o and keys are removed.
- Check if an SD memory card is inserted in the Vision Drive.
- Start up the car
- Normal recording starts when LCD is on, voice guidance is released and record preview is
temporarily shown through the LCD screen after startup. (REC Lamp on)
- GPS lamp-on can take from several seconds to minutes depending on the reception location.
7-2) Features and operation
- Vision Drive doesn’t record for safety reasons when voice guidance is being given or the LCD
screen is on (START/VIEW/PLAY).
- The stored event les (Impact/Shot) are played if the PLAY button is pressed.
To see another (previous) impact le stored, press VIEW button while playing an impact le.
(The audio play only works in the VD Analyzer software on your PC in the case that audio
record was set to [on].)
- LED and Audio of this product indicate the following details.
LED Sound Details
Red - GPS data is not being received
Blue - GPS data is being received well
Blue - Ordinary record is normally running
Red Tone Event record is running
GPS
REC
To Next Page
Loading...
