VisionNet 560780 - Sound and Light Indication; Admin Menu; Standalone Mode Settings

- 5 -
7. Sound and Light Indication
Operation Status
Light indicator
Buzzer
Stand by Red
Operation successful Green Beep—
Operation failed Beep-Beep-Beep
Admin card enter programming Beep-Beep
Admin card exit programming Beep—
Press digital key Beep
Press * key Beep—
Press access code Red indicator flash slowly
Read card under card plus code mode Red indicator flash slowly
Read multi user cards Red indicator flash slowly
Enter programming mode Red indicator flash slowly
Enter setting status Orange
Unlocking Green
Buzzer alarm Red indicator flash quickly Alarm
8. Adm
in Menu
8.1 Standalone Mode Settings
Device Management
Enter programming
Men
u
Operation steps Description
Default
value
Press * Admin code #
(Default admin code is
"999999")
00 New admin code # new admin code # Change admin code 999999
01
Read card
/ Input a fingerprint twice *
Set admin add card or admin add
fingerprint
02
Read card
/ Input a fingerprint twice *
Set admin delete card or admin
delete fingerprint
03
0# Reader mode
1
1# Standalone access control mode
2# Relay toggle mode
08
WIFI matching
Optional
09
Unlocking code # (4-6 digits) Public code