VisionNet 560780 - Add and Delete Users; Access Ways Configuration

- 6 -
Add and Delete Users
Enter
programming
Menu Operation steps Description Default value
Press * Admin
code #
(Default admin
code is "999999")
11
Read card
/ Input a fingerprint twice... *
Add card users or fingerprint users
continuously
“…” means
repeating the
previous
operation,
Press * key to exit.
Press 8 or 10 digits card
number # … *
Add card users by card number
Press ID number # read
card
/ Input a fingerprint twice … *
Add card users or fingerprint users by
specific ID number
Press ID number # press 8
or 10 digits card number # … *
Add card users by specific ID number
and card number
Press ID number # press code
# … *
Add an independent user code by
specific ID number
12
Read user card, input the
first fingerprint twice, input the
second fing
erprint
twice...*
Match fingerprints to a card
(Maximum 2 fingerprints)
13
Press ID number # press 8
or 10 digits card number #
input card quantity #
Add conductive number card
Delete users
21
Read card
/ I
nput a fingerprint once … *
Delete card users by reading card /
Delete fingerprint users by
inputting fingerprint
“…” means
repeating the
previous
operation,
Press * key to exit.
Press 8 or 10 digits card
number #… *
Delete card users by card number
Press ID number # … * Delete users by ID number
20 0000# Delete ALL users
Ac
cess Ways
Enter programming Menu
Operation
steps
Description
Default
value
Press * Admin code #
(Default admin code is
"999999")
31
0# Forbidden opening door
4
1# Entry by code only
2# Entry by card only
3# Entry by card+ code/fingerprint + code
4# Entry by card, fingerprint or code
5# Entry by fingerprint only
6#
Entry by fingerprint + card
7# Entry by multi-fingerprint / multi-card
32
1# Set door open by 1 user card/user fingerprint
1
2-10 #
Set door open by 2-
10 user cards/user
fingerprints