Installing the Visonic PowerLink
19
3. In the Visonic PowerLink Installation Form (see appendix A), write down the
value of SSID for future reference.
4. Select a Channel. (You can pick any channel. The default channel is usually 6).
5. Mark the selected channel in the Visonic PowerLink Installation Form
(Appendix A).
Step 6: Wi-Fi Encryption Configuration
PowerLink supports three encryption methods:
1. No encryption
2. WEP 64bit / 128bit
3. WPA
Enabling encryption on your Wi-Fi network is highly recommended and ensures that
any information transferred on the Wi-Fi network such as camera images is secured
against unauthorized viewers.
Refer to your router user's manual in order to set up encryption.
Some routers need restart in order to apply the settings. Please make sure to restart the
router if restart is needed.
To Next Page
Loading...