Visonic PowerLink - Visonic Powerlink Configuration; Step 1: Logging-In to the Visonic Powerlink

Installing the Visonic PowerLink
20
Visonic PowerLink Configuration
Step 1: Logging-in to the Visonic PowerLink
1. Before logging-in, the PowerLink has to be enrolled to the PowerMax+ /
PowerMax PRO. In order to enroll the PowerLink:
• On the PowerMax+ / PowerMax PRO, enter the "USER SETTING"
menu.
• Choose "DEFINE PWRLNK" -> "Install".
• Press "Show/OK". Wait for the confirmation sound.
• Press "Away". Press "Show/OK".
2. Open your Internet Browser and in the Address line type
HTTP://< Visonic PowerLink IP Address>. Replace
<Visonic PowerLink IP Address> with the value of "PowerLink IP
Address" from the Installation form (see appendix A).
3. In Visonic PowerLink's Login screen: enter the Username and Password.
Default Username and Password values (if not changed by owner or installer):
Username: Admin
Password: Admin123
Note
Username and Password are case-sensitive.
4. Click Login >>.
If you are unable to login, call your Visonic PowerLink service provider for
assistance.