Visonic PowerLink - Managing the Security System; System Status and Arming Modes

Managing the Security System
47
Chapter 7: Managing the Security System
The Security view Work Area displays a detailed overview of the security system
including the current arming mode of the security system, the status of the security
system, the list of detectors and their statuses and a list of other security system
accessories.
It enables you to remotely arm and disarm the security system in different arming
modes.
Arming the PowerMax+ / PowerMax PRO Security System
The Visonic PowerLink enables remote arming and disarming of the PowerMax+ /
PowerMax PRO Security System.
The Security view displays the current status of the PowerMax+ / PowerMax PRO
security system according to the arming mode set.
The following arming modes are available:
• AWAY: All zones are protected
• HOME: Perimeter zones are protected but interior zones are not.
• DISARM: The system is in standby mode
The Security view displays the current arming mode in green.
Current Arming Mode Current Status
Accessories
Detectors Enrolled in the S
y
stem
System Status