Visonic PowerLink - Page 7

Getting Started
7
• Camera Types:
o Visonic CAM1000 - RS-485
o Visonic CAM2000 - Ethernet
o Visonic CAM2000WL - WiFi / Ethernet
o Visonic CAM3100 - WiFi / Ethernet / IR / 60 degrees FOV
o Visonic CAM3200 - WiFi / Ethernet / Pan Tilt / IR / 60 degrees
FOV
o Vivotek IP7135 - Network Camera
o Vivotek IP7137 - WLAN Network Camera
o Vivotek PT7135 – Pan / Tilt Network Camera
o Vivotek PT7137 – Pan / Tilt WLAN Network Camera
o Vivotek FD7131 – Indoor Dome with While LED
o Vivotek FD6112V / FD6122V – Fixed Dome Network Camera
o Vivotek VS2101 – MJPG Video Server
• Auto enrollment of LAN and WiFi cameras to the home network
• Auto Capture Of 10 Post Alarm Images Per Camera
• Auto Capture Of 5 Pre Alarm Images Per Camera
• Turn On / Off for web view according to the alarm modes
• Flip & Mirror camera images for floor and ceiling installations
• Camera Actions:
o Pan / Tilt
o Save Image to Local HD
o Turn ON, OFF
o Current View / Alarm View
Users
• 1 Master User
• 7 Standard Users
Management
• IP Address: Auto configuration or Manual Configuration
• Reset to Factory Defaults Option
• Remote Firmware Upgrade
Web Server
• Ports: 443 (SSL), 80 (HTTP)
• Ports can be changed by user
• Automatic port forwarding with UPNP support