VITACLAY VM7900-6 - How to set a Delayed Start for Rice Cooking; Delayed Start Procedure for Rice; Note on Changing Rice Time; Basic Grain Cooking Directions

To Next Page

To Previous Page

Note: If you plan to hold the rice in the Warm mode for

longer than 1 hour, add an extra ¼ cup of liquid at the

beginning of cooking.

How to set a Delayed Start for Rice Cooking

You simply need to add 2 steps to delay the start of the

cooking time:

• Once you have selected the rice cooking mode but

before you press the “Start/Cancel” key (while the

“Start/Cancel” indicator light is still blinking), press

the “Delay” Start key.

• Using the “Hour” and “Minute” Timer keys, set the

desired time to delay cooking. This time will be

displayed on the clock. (For example, to delay the

cooking start time for one hour, set clock to read

“1:00” or to delay for 3 hours and 30 minutes, set

clock to read “3:30”.)

• Press the “Start/Cancel” key

• The LCD Display clock will show the “Delay” Start

time; the “Delay” indicator light will be illuminated

indicating the cooker will begin cooking at the

desired time.

NOTE: You cannot change the cooking time once the

Cooker enters a cooking mode. Simply press the

Start/Cancel key and start over.

Basic Grain Cooking Directions

• If using quinoa, follow grain to water proportions

listed in chart above and use the regular cooking

mode.

• If using mixed whole grains, follow grain to water

proportions listed in chart above and use the brown

cooking mode.

• If using mixed wild rice, follow grain to water

proportions listed in chart above and use the brown

cooking mode.