Step 4: Position VitalPatch on the body.
With the adhesive backings still adhered, place the VitalPatch device on a flat body surface on the left
chest with one electrode two fingers below the suprasternal (jugular) notch, and angled diagonally toward
the heart. The exact angle is not critical; it is more important
to locate the flattest surface of the chest for the VitalPatch
device placement in order to minimize movement during the
monitoring session. The battery side of the VitalPatch device
should be pointed to the left side of the patient's chest. See
image to the right.
If the device cannot be placed in the Primary Location use
the Secondary Location instead. The Secondary Location is located just left of the centerline, below the
chest on the rib cage, positioned horizontally in an area with minimal body curvature. This location is not
recommended for obese persons.
Note: The VitalConnect logo should be oriented such that
it is readable by someone facing the patient when it is
applied. The battery will be closest to the left side of the
chest.
To Next Page
Loading...
