Need help?Do you have a question about the Vitalograph copd-6 BT and is the answer not in the manual?
General| Measurement Parameters | FEV1, FEV6, FEV1/FEV6 Ratio |
|---|---|
| Connectivity | Bluetooth |
| Display | LCD |
| Battery Life | Approximately 1000 tests |
| Flow range | 0 - 14 L/s |
| Device Type | COPD Screening Device |
| Type | Spirometer |
| Battery Type | 2 x AAA |
| Accuracy | ±3% or 0.05L, whichever is greater |
| Operating Temperature | 17°C to 37°C |
| Storage Temperature | -20°C to 70°C |
Lists key functionalities like early COPD detection, FEV1/FEV6 display, and obstructive index.
Details on inputting subject's age, height, and gender for accurate predicted data.
Step-by-step guide on how to conduct a spirometry test with the device, including subject instructions.
Configuration of GOLD standard zones for Obstructive Index and COPD Classification based on FEV1% and FEV1/FEV6 ratio.
Procedure to access and view the results from the most recent spirometry test session.
Instructions for transmitting test results to Vitalograph Reports software on a PC for storage and PDF generation.
Recommended weekly cleaning procedures for the mouthpiece, surfaces, and flowhead using isopropyl alcohol.
Procedures to prevent cross-contamination, including use of Eco BVF filters and cleaning between subjects.
Specifies the device's intended purpose for measuring FEV1 and FEV6 in adults and children for lung function testing.
To Next Page