Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 41 of 45 DT_0006-6
RF. IEC
61000-4-3
80 MHz to
2.5 GHz
80MHz top
2.5GHz
MHz
d = 2.3√P…800 MHz to
2.5GHz
Where P is the maximum
output power rating of the
transmitter in Watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in metres (m)
Field strengths from fixed
RF transmitters, as
determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
To Next Page
Loading...
