7
Variable Speed Dial –
• The Variable Speed Dial gives you control from Low Speed (slowest) to High
Speed (fastest).
• If the Variable Speed Dial is pointed to “O”, the machine is o.
• If the Variable Speed Control is rotated clockwise and away from “O”, the blades
will spin.
• CAUTION: If you unplug the unit and plug it back in when the Variable Speed Dial
is not pointed at “O”, the motor will start at the speed indicated on the Variable
Speed Dial.
• To avoid inadvertently starting the machine, always make sure the Variable Speed
Dial is pointed to “O” when finished with a blend and before plugging the machine
in with the power cord.
Variable Speed Dial
Co n t ro l S
To Next Page
Loading...
