Vitea Care Junior Plus - Backrest Height Adjustment; Adjusting the Backrest Angle

Backrest height adjustable lever
MODEL: JUNIOR
PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
VITEACARE.COM 19
BACKREST HEIGHT ADJUSTMENT
• To change the backrest height, should loosen pair of backrest high adjustable knob
(Fig. 26.).
• Grasp upper edge of the backrest by using hand, set the desired position.
• Tighten a pair of knobs which were loose before.
Armrest height adjustable knob
Fig 27. Armrest adjustment
• To change the height of the armrest, unscrew both knobs located under the armrest, then
select the height and tighten the knobs (Fig 27.).
Trunk height adjustable knobs
HEIGHT ARMREST ADJUSTMENT
ADJUSTING THE BACKREST ANGLE
• To change the angle of the backrest, push by thumb on the upper edge of the backrest.
Grab lever adjusting the angle of the backrest from the bottom. Pull the lever and set
convenient location in one of four positions.