Why is my Vitek VT-2350 Humidifier not producing mist?
If your Vitek Humidifier isn't producing mist, there are a few things to check. First, ensure the power plug is properly inserted into the mains socket. Next, verify that the unit is switched on by pressing the button (15). Finally, make sure the water tank (2) has enough water; if it's empty or low, fill it with water.
What to do if my Vitek VT-2350 smells bad?
If you notice a foreign smell from your Vitek Humidifier during operation, it could be due to a couple of reasons. If it's the first time you're using it, disconnect the unit, remove the water tank, take off the lid, and empty the water. Then, leave the water tank in a dry, cool place for 12 hours. Alternatively, the smell might be from dirty or stale water. In this case, unplug the unit, remove the water tank, remove the lid, pour out the old water, clean the tank as described in the chapter “Cleaning and care”, and refill it with clean water.
How to fix a noisy Vitek VT-2350 Humidifier?
If your Vitek Humidifier is making a strange noise, there are several potential causes. First, ensure that the water tank is installed correctly. Second, check that there's enough water in the tank and fill it if necessary. Finally, make sure the unit is placed on a flat, steady surface.
What to do if the Vitek VT-2350 display is red and there is no mist?
If the display symbol on your Vitek Humidifier is glowing red and no mist is being released, the water tank is likely empty. Refill the water tank with water to resolve this issue.
Why is my Vitek VT-2350 making a strange noise?
If your Vitek Humidifier is making foreign noises, it might be placed on an uneven surface. To fix this, unplug the humidifier and either level its body or move it to a different location.
How to fix low mist on Vitek VT-2350 Humidifier?
If the mist release intensity is low on your Vitek Humidifier, the nozzle might be dirty. Unplug the unit and clean the nozzle to improve mist release.
Why aren't the lights on and there is no mist on my Vitek VT-2350 Humidifier?
If the operation symbols on your Vitek Humidifier don't light up and there's no mist, it could be due to a lack of power. First, ensure the unit is properly connected to the mains. If it still doesn't work, test the socket with another appliance to confirm the socket is functioning correctly.
Why does my Vitek Humidifier smell bad?
If the mist from your Vitek Humidifier smells unpleasant, especially upon first use, pour out the water and leave the tank open for 12 hours in a cool, darkened place. If the issue persists, the water may be dirty or stale. Unplug the unit, remove the water tank, discard the old water, wash the tank, and refill it with clean boiled or distilled water.
Details device compatibility and methods to download the Vitek application.
Guides through registering a new user account, verification, and password setup.
Step-by-step process for connecting the humidifier to the mobile app via Wi-Fi.
Completing the connection process and initial device activation on the mobile app.
Explains the main components of the humidifier's control panel.
Details on On/Off, Intensity, Timer, Humidity, Lighting, and Night Mode.
Instructions for environmentally responsible disposal of the unit and batteries.
Information on warranty conditions and product compliance with directives.
General| Type | Ultrasonic |
|---|---|
| Power Consumption | 30 W |
| Water Flow Rate | 300 ml/h |
| Noise Level | 35 dB |
| Water Tank Capacity | 5 liters |
| Features | Aroma tray |
| Operating Time | 16 h |
To Next Page
