EasyManua.ls Logo

Vitek VT-6412 - Maintenance; Technical Specifications

Vitek VT-6412
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
7
Note:
the weather forecast accuracy is about
50%, at sudden change of weather the
forecast accuracy increases;
the weather forecast on the weather sta-
tion display may not match the current
weather conditions, in this case we rec-
ommend trusting the local weather fore-
cast;
the symbol “Sunny” means sunny
weather at night as well.
Switching the display illumination on
When the weather station is battery pow-
ered, touch any button (3, 4, 5, 8, 9, 11) to
switch the display illumination on, the dis-
play illumination will go out in 5 seconds.
Using the power adapter
Before using the power adapter make
sure that your home mains voltage cor-
responds to the power adapter operat-
ing voltage.
Insert the power adapter (23) plug (22)
into the socket (15), plug the power
adapter in, the display illumination will
light up.
Note: - when the main unit (1) is powered by
the adapter (23), the batteries in the battery
compartment switch off.
Unfold the base (14) and place the main
unit (1) to the desired place.
MAINTENANCE
Do not disassemble the unit by yourself,
there are no parts inside the weather
station body which require replacement.
Use only new batteries, do not install new
and old batteries together.
Insert the batteries, strictly following the
polarity.
After changing the batteries set the cur-
rent time on the main unit (1) and recon-
nect it with the external sensor (17).
Clean the main unit (1) body and the
external sensor (17) with a soft, slightly
damp cloth, and then wipe them dry.
Do not use abrasives or solvents.
Do not immerse the main unit (1) and the
external sensor (17) into water or any
other liquids.
STORAGE
If you are not going to use the weather
station for a long time, it is recommended
to remove the batteries from the main unit
(1) and the external sensor (17).
Keep the unit in a dry cool place
out of reach of children and disabled
persons.
DELIVERY SET
Weather station – 1 pc.
External wired sensor – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Main unit
от 0 °C до + 50 °C
(от 32 °F до 122 °F)
External sensor
from -30 °C to +70 °C
(from -22 °F to +158 °F)
Temperature measurement precision +/-1 °C
Relative humidity measurement limits from 25% to 95%
Relative humidity measurement precision +/-5%
External sensor data transmission
Data transmission frequency 433 MHz
Number of data transmission channels 3
Transmission range maximum 30 m
IM VT-6412.indd 7 27.02.2018 16:44:44

Related product manuals