23
◆ Backlight Brightness
BL stands for backlight. Parameters 1, 2, 3 can be set to indicate backlight brightness,
1 is the darkest, 2 is the standard brightness, and 3 is the brightest. The default value
of the instrument factory is 1. The backlight brightness parameter can be changed
through the UP/DOWN key. Press the "i" key for a short time to confirm and enter the
metric-imperial unit conversion setting state, and press the "i" key for a long time to
confirm and exit the normal setting state.
◆ Conversion of Imperial and Metric Units
U for units, 1 for imperial system and 2 for metric system. Speed and mileage units
can be converted through UP/DOWN key, short press "i" key to confirm, long press "i"
key to confirm and exit the normal setting state. The default unit of the instrument is
metric.
To Next Page
Loading...
