VITRA Tyde - User Manual

Other manuals for VITRA Tyde

Operating Instructions12 pages

Assembly Instructions36 pages

Questions and Answers

B
bjordanJul 27, 2025
What to do if my VITRA Tyde Indoor Furnishing table cannot be moved up or down?
- S
  Sally SmithJul 28, 2025
  If your VITRA Indoor Furnishing table cannot be moved up or down, it might be due to a power failure. To resolve this, unplug the power cord for 1-2 seconds and then reset the unit.
G
greynoldsAug 1, 2025
What to do if E02 or E28 appear on my VITRA Tyde display?
- A
  Andrea GreerAug 1, 2025
  If an E and the error code 02 or 28 appear on the display of your VITRA Indoor Furnishing table, it indicates an overload when moving up. To fix this, move your table down by more than 10 mm. After that, your table can be moved up/down as usual. If this error appears regularly, unplug the power cord and contact your Vitra retailer.
E
Emma BrownAug 4, 2025
How to fix error code E01 on a VITRA Indoor Furnishing table?
- W
  Wendy UnderwoodAug 4, 2025
  If an E and the error code 01 appear on the display of your VITRA Indoor Furnishing table, it means the position is lost. To resolve this: 1. Reset the unit. 2. Unplug the power cord for 1-2 seconds and then reset the unit again. If the error persists, unplug the power cord and contact your Vitra retailer.
E
Erica WattsAug 9, 2025
What to do if error E03 appears on my VITRA Tyde Indoor Furnishing table?
- V
  vgomezAug 9, 2025
  If an E and the error code 03 appear on the display of your VITRA Indoor Furnishing table, it indicates an overload when moving down. Here's what to do: 1. Remove any objects that are impairing the downward movement. 2. Give the table an 18 minute break. If E03 still appears on the display after these steps, contact your Vitra retailer.
M
mejiakatelynAug 13, 2025
What does error code E02 or E29 mean on my VITRA Tyde table?
- C
  Cindy LivingstonAug 14, 2025
  If an E and the error codes 02 or 29 appear on the display of your VITRA Indoor Furnishing table, it indicates an overload when moving up. To address this: 1. Remove all loads from the table. 2. Give the table an 18 minute break. If E02 still appears on the display after these steps, contact your Vitra retailer.
D
David JordanAug 18, 2025
Why does error code E40 appear on my VITRA Indoor Furnishing table?
- R
  Richard RobinsonAug 18, 2025
  If an E and the error code 40 appears on the display of your VITRA Indoor Furnishing table, it indicates an overload while the table is being raised or lowered. The error code E40 will only appear as long as the button is pressed. Your table can now be moved up/down as usual.
W
William SanchezAug 21, 2025
What does error code E16 mean on my VITRA Tyde Indoor Furnishing table?
- A
  amanda95Aug 21, 2025
  If an E and the error code 16 appear on the display of your VITRA Indoor Furnishing table, it means an incorrect button was accidentally pressed. The error code E16 will only appear as long as the button is pressed, and your table can now be moved up/down as usual.