What does E02, E029, E41-E52 mean and how to fix it on VITRA Indoor Furnishing?
If you see error codes E02, E029, or E41-E52 on your VITRA Indoor Furnishing, it indicates an overload when moving up. To resolve this: 1. Remove all loads from the table. 2. Do not activate the table for 18 minutes.
What to do if motor, control system, telescopic guides or handset of VITRA Tyde 2 does not work?
If the motor, control system, telescopic guides, or handset of your VITRA Indoor Furnishing isn't working, it could be due to several reasons such as a bad plug contact, a faulty motor, a faulty control system, a faulty handset, or a faulty feed cable. In any of these cases, it is recommended to contact your Vitra retail partner for assistance.
What to do if my VITRA Tyde 2 power cannot move up/down?
If your VITRA Indoor Furnishing power cannot move up or down, first check for a power failure. Unplug the power cable for 1-2 seconds to resolve this. If the issue persists, try resetting the unit.
What does it mean when an E and another error code appear on the display of VITRA Indoor Furnishing?
If an 'E' followed by another error code appears on the display of your VITRA Indoor Furnishing, it indicates an internal error. In this case, contact your Vitra retail partner for assistance.
What does E16 mean and how to fix it on VITRA Tyde 2 Indoor Furnishing?
The E16 error code on your VITRA Indoor Furnishing appears only as long as the button is held down, likely due to a button pressed accidentally. Your table will now be able to move up and down normally again.
What does E40 mean and how to fix it on VITRA Tyde 2?
The E40 error code on your VITRA Indoor Furnishing indicates overloading while the table is being raised or lowered. The error code only appears for as long as the button is held down and your table will now be able to move up and down normally again.
What does E02, E028 mean and how to fix it on VITRA Tyde 2?
If you see error codes E02, E028 on your VITRA Indoor Furnishing, it indicates an overload when moving up. To resolve this: 1. Move your table down more than 10 mm. 2. Your table will now be able to move up and down normally again.
What does E53-E64 mean and how to fix it on VITRA Tyde 2?
If you are seeing error codes E53-E64 on your VITRA Indoor Furnishing, this indicates a collision. To fix this: 1. Remove any objects that might be blocking the table. 2. Do not activate the table for 18 minutes.
What does E03 E41-E52 mean and how to fix it on VITRA Tyde 2 Indoor Furnishing?
If error codes E03 and E41-E52 appear on your VITRA Indoor Furnishing, it means there's an overload when moving down. Here’s how to fix it: 1. Remove any objects that might be blocking the table and preventing it from moving down. 2. Do not activate the table for 18 minutes.
What to do if my VITRA Tyde 2 Indoor Furnishing table cannot be moved up or down?
If your VITRA Indoor Furnishing table cannot be moved up or down, it might be due to a power failure. To resolve this, unplug the power cord for 1-2 seconds and then reset the unit.
Details the correct and intended use of the Tyde 2 stand-sit table, emphasizing office furniture applications.
Defines the meaning of danger, caution, and attention symbols used in the manual to indicate hazards.
Specifies that electrical fittings must only be handled by qualified electricians and warns against unsupervised children's maintenance.
Highlights the desk sensor as an anti-collision feature and warns against unplugging it.
Provides safety instructions to avoid injury caused by mains-related overvoltage, including power handling and cable safety.
Details measures to avoid injury caused by overheating, advising on usage limits and break times for the table.
Explains optimal load distribution for table columns and limits for edges and the total tabletop area.
Lists and illustrates the various components of the Tyde 2 table, including cable passage, handset, and desk sensor.
Provides technical specifications for the SMPS006 switching power supply unit.
Describes the features of DPG1K and DPG1C handsets, including up/down controls and display capabilities.
Explains the functions associated with symbols on the control buttons: reminder, favourites, and Bluetooth connectivity.
Details how to save up to four preferred table height positions using the handset controls.
Explains the procedure to delete all saved favourite height positions for the table.
Describes how the LED light bar indicates the need for a position change to improve user posture.
Explains how to set default intervals for position change reminders and their corresponding light bar colour indications.
Guides on how to perform a reset procedure, including safety precautions and potential interruptions.
Details the process of resetting the DPG to its configurable state, affecting directly changed settings.
Instructs on how to adjust the height display and switch between metric (cm) and imperial (inch) units.
Provides guidance on cleaning and maintaining the table surfaces and general care recommendations.
Outlines procedures for shutting down the table and disposing of electronic and other components according to regulations.
Advises on how to obtain spare parts and inquire about available accessories for the table.
Declares compliance with EC Machinery and EMC directives, listing applied harmonized European standards.
Lists applied standards and technical specifications, including those for office desks and electrical equipment in furniture.
General| Category | Indoor Furnishing |
|---|---|
| Product Name | Tyde 2 |
| Manufacturer | Vitra |
| Color Options | Various |
| Usage | Office, Home Office |
| Type | Table |
| Table Top Material | Linoleum, Veneer |
| Base Material | Steel |
| Material | Steel, Linoleum, Veneer |
| Dimensions | Various sizes available |
| Weight | Varies |
To Next Page
