VITRA Tyde 2 - Position Change Reminders; Reminder Functionality; Reminder Intervals and Display

EN
20
A colour that lights up in your LED light bar indicates that a position
change is due.
The colour indicates the current usage status of the table. When the
colour changes, the user is reminded that it is time to change the
position. The reminder function thus helps to improve the posture of
the user by reminding them to vary their position during the working
day.
Reminder for position change/description
(DPG1C02-000006)
Reminder for position change/restart (DPG1C02-000006)
The reminder is automatically restarted when your table is moved to
seat height.
-display shows green light strips
Reminder for position change/timeout
(DPG1C02-000006)
After 4 hours without action, the light bar automatically goes out.
When you press the handset, you automatically activate the timer -
display shows green light strips
The preset default interval issues a reminder after 55
minutes (light block white).
Default interval/description
(DPG1C02-000006)
Press
Switch through the intervals by pressing repeatedly.
Default interval/change
(DPG1C02-000006)
Reminder for position change/reset (DPG1C02-000006)
Press and hold for 8 seconds
After 5 seconds, the display shows a countdown and the light bar
flashes red when the reminder is reset.
Default interval/light bar colour display
(DPG1C02-000006)
Colour dis-
play
Light block
Description
white 1x
reminder after sitting
for 55 minutes
white 2x
reminder after sitting
for 50 minutes
white 3x
reminder after sitting
for 45 minutes
white off
reminder for the default interval is
deactivated