ADJUSTING AIR FLOW DIRECTION
Perform this function while the air conditioner is in
operation. Push the SWING button on the
remote controller.
To stop the function, push the SWING button again.
To change the swing direction, push the AIR
DIRECTION button.
The AIR DIRECTION and SWING buttons will
be disabled when the air conditioner is not in
operation (including when the ON TIMER is set).
Do not operate the air conditioner for long hours
with the air flow direction set downward during the
cooling or dry operation. Otherwise, condensation
may occur on the surface of the vertical air flow
louver and cause dew dripping.
Do not move the vertical louver manually. Always
use the AIR DIRECTION button. If you move the
louver manually, it may malfunction during
operation. If the louver malfunctions, stop the air
conditioner once and restart it.
When the air conditioner is started immediately
after it was stopped, the vertical air flow louver
might not move for 10 seconds or so.
To automatically swing the air flow direction
CAUTIONS
12
To Next Page
Loading...
Need help?
General
