TE
MP
CLO
C
K
SP
EE
D
MO
DE
FA
N
SP
EE
D
ON
O
FF
T
E
M
P
C
ADJUSTING AIR FLOW DIRECTION
EXAMPLE OF TIMER SETTING
Adjust the air flow direction properly. Otherwise, it might
cause discomfort and make the room temperature uneven.
Adjust the vertical air flow louver using the remote controller.
Adjust the horizontal air flow grilles manually.
The air conditioner automatically adjust the vertical air flow
direction in accordance with the operating conditions.
Perform this function while the unit is in operation.
Keep pushing the AIR DIRECTION button on the remote
controller to move the louver to the desired direction.
Change the vertical air flow louver direction within the
range indicated.
In subsequent operations, the vertical air flow is
automatically set in the direction to which you adjusted
the louver puusing the AIR DIRECTION button.
Adjusting the Vertical Air Flow Direction
To set the air flow direction you desire
Example:
On timer ¡ú OFF timer
(Stop ¡ú Operation ¡ú Stop)
You can use this setting to start the air conditioner when
you wake up and stop it when you leave the house.
To start the air conditioner at 6:00 nest morning, and stop it
at 8:00.
1. Push the TIMER ON button.
2. Use the TIME ADJUST button to display "6:00" on the
ON timer indicator of the remote controller.
3. Push the TIMER OFF button.
4. Use the TIME ADJUST button to display "8:00" on the
OFF timer indicator.
5. Push the OK button.
The timer function (ON or OFF ) which in time is closest to
the actual time will be activated first.
If the same time is set for both ON and OFF timers, no
timer operation is performed. Also, the air conditioner may
stop operating.
.
.
Stop
Stop
Operate
On timer
Off timer
6:00
8:00
11
When cooling and dehumiditying
are selected, set the
louver within the
blue region.
.
To Next Page
Loading...
Need help?
General
