EasyManua.ls Logo

Vive DMD1001 - Technical Specifications; General Safety Guidelines

Vive DMD1001
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
SPECIFICATIONS
Power Supply: Battery Powered Mode: 6V DC 4 x AAA Batteries
AC Adaptor Powered Mode: 6V 1A (Please only use recommended AC
adaptor - not included.)
Display Mode: Digital LCD V.A. 60mm x 92mm
Measurement Mode: Oscillographic testing mode
Measurement Range: Rated cuff pressure: 0 kPa - 40 kPa
(0mmHg~300mmHg)
Measurement Pressure: 5.3kPa - 30.7kPa (40mmHg-230mmHg)
Pulse Value: (40-199) beat/minute
Accuracy: Pressure: 5kPa - 40kPa within + 0.4kPa (3mmHg)
Pulse Value: + 5%
Normal Working Condition: Temperature: 5ºC-40ºC Relative
Humidity: < 8.5%
RH Atmospheric Pressure: 86kPa - 106kPa
Storage & Transportation Condition: Temperature: -20ºC - 60ºC
Relative Humidity: 10% RH - 93% RH
Atmospheric Pressure: 50kPa - 106 kPa
Measurement Perimeter of the Upper Arm: About 22cm~42cm
Weight: Approx: 366g (Excluding the dry cells)
Exterior Dimensions: Approx: 140mm x 130mm x 49.7mm
Mode of Operation: Continuous Operation
Degree of Protection: Type BF applied part
Protection against ingress of water: IP21
Software Version: V.01
WARNING: No modication of this equipment is allowed.
SAFETY INFORMATION
The signs to the right might be in the user manual, labeling or other
component. They are the requirement of standard and using.