What does E21 mean on my Vive DMD1001 Blood Pressure Monitor?
If your Vive Blood Pressure Monitor displays 'E21', it indicates that the measurement process failed. Relax for a moment and then measure again.
Why does my Vive Blood Pressure Monitor display E10, E11, E20, E21, or EExx?
If your Vive Blood Pressure Monitor displays error codes E10, E11, E20, E21, or EExx, it means the monitor detected motion, talking, or a poor pulse during measurement. Try loosening clothing on the arm and remeasure. Relax for a moment before retaking the measurement.
What to do if my Vive DMD1001 display is dim?
If the display of your Vive Blood Pressure Monitor is dim, the batteries may be low. Replace them with new batteries.
What to do if my Vive Blood Pressure Monitor shows E 1?
If your Vive Blood Pressure Monitor displays 'E 1', it indicates that the cuff is not secure. Refasten the cuff and then measure again.
What to do if my Vive Blood Pressure Monitor shows E 2?
If your Vive Blood Pressure Monitor displays 'E 2', it means the cuff is very tight. Readjust the cuff so it is not too loose or too tight, and then measure again.
Why does my Vive Blood Pressure Monitor say low battery?
If your Vive Blood Pressure Monitor shows a low battery error message, it means the batteries are low and should be replaced with new ones.
What does E 3 mean on my Vive Blood Pressure Monitor?
If your Vive Blood Pressure Monitor displays 'E3', it indicates that the cuff pressure is excessive. Relax for a moment and then measure again.
What does E 2 mean on my Vive DMD1001 Blood Pressure Monitor?
If your Vive Blood Pressure Monitor displays 'E2', it means the cuff is very tight. Readjust the cuff so it is not too loose or too tight, and then measure again.
What does it mean when my Vive DMD1001 shows E3?
If your Vive Blood Pressure Monitor displays 'E3', it indicates that the pressure of the cuff is excess. Relax for a moment and then measure again.
What does it mean when my Vive DMD1001 Blood Pressure Monitor shows E21?
If your Vive Blood Pressure Monitor displays 'E21', it means the measurement process failed. Retake the measurement.
Guides the user through setting the device's date, time, and measurement units.
Provides instructions on how to correctly attach and position the blood pressure cuff on the arm.
Details the steps required to perform a blood pressure measurement.
Addresses issues related to the device not powering on.
Provides solutions for when the display is dim or shows low battery indicators.
Lists common error codes and their troubleshooting steps.
General| Brand | Vive |
|---|---|
| Model | DMD1001 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page