7
7. Repeat step 2 and 3 to set the [MEASUREMENT UNIT].
8. After the unit is set, the LCD will display “done” first, then display all the
settings you have done and then it will turn off.
mmHg is
U.S. Standard
Measurement
OPERATING INSTRUCTIONS - APPLYING THE CUFF
1. Attach the cuff tubing to the left side input
for proper use.
2. Apply the cuff on your upper arm. Make
sure the position of the tube is off-center;
toward the inner side of arm in line with the
little finger.
3. The cuff should be snug but not too tight. You
should be able to insert one finger between
the cuff and your arm.
2~3cm
To Next Page
Loading...