6.3.3 Key positions of battery
Know the key port and battery power supply position
before riding. As shown in the picture below, the key
port aligns to the key position 1 and consistent with
the ON icon. At key position 1, the battery is at the "ON"
position, the battery is locked to the frame, and the key
cannot be removed.
1
2
3
Power on, and lock the battery on the frame
Power off, and lock the battery on the frame
Power off, unlock battery from the frame and take it out
Key position/icon Credit/debit
When the battery is locked on the frame, turn on the battery switch. Then, long
press the button of the Meter panel for 2 seconds to power it on. At this time,
the electric bike is at the power-on state.
Pure electric bike (pure electric mode): Rotate the throttle lever (right handlebar)
inward (anticlockwise), start the bike, adjust the rotating angle of speed control
handlebar from small to large, and the speed is changed from slow to fast. The
speed can be adjusted by adjusting the tap position.
Bike assisted by pedal (boost mode): Step on the pedal. As the dish of wheel
rotates, the motor will be started.
6.4.1
6.4.2
6.4.3
6.4 Bike startup
To Next Page
Loading...
