resolution.
7. When the camera`s internal memory is full, “Memory Full” will appear on the LCD
screen when you attempt to press the Shutter button to take a photo. Either
download the photos to your computer using the Vivitar Experience Image
Manager software as described below in the section “Transfer photos and
videos to your computer” or insert an SD card to continue taking more photos
and videos.
8. The number of photos that can be captured not only depends on the SD card’s
capacity but also on the resolution selected. Better quality photos are taken at
higher resolutions but these will also take up more memory on the card.
9. The screen will power off automatically if the camera is not active for 30 seconds.
Press any key to restart the screen.
10. Do not take the memory card or battery out when camera is saving the image,
otherwise the image won't be saved completely.
To Next Page
Loading...
