1. Push the OK joystick button Up/Down to select the appropriate USB
mode.
2. Push the OK joystick button Right for the USB Mode options to appear:
Mass Storage , PC Camera.
3. Push the OK joystick button Up/Down to highlight and select the USB
Mode option you desire.
Note: If you desire the other mode once connected to the PC press the
OK button to change.
4. Press the OK button to confirm and save your choice.
5. Press the Menu button to exit.
Firmware Version
Select this mode to view the firmware version number for this camera and the
last date that this firmware was updated.
To Next Page
Loading...
