CONNECTING YOUR ACTION CAM TO YOUR MOBILE DEVICE
1. Setting up the WiFi connection on your Action Camcorder:
Make sure you have installed a TF card and power on your Action Camcorder.
Power on your camcorder and then press the Wi-Fi button on the side of the camera to
enable the WiFi connection. ‘WiFi On’ first appears on the LCD screen, then the following
details are displayed on the screen: ‘SSID:DVR914HD_xxxxxx, Password and Wi-Fi
Disconnect’.
The Wi-Fi button’s red LED light blinks indicating it is searching for the WiFi connection.
2. Setting up the WiFi connection on Your Mobile Device:
Open ‘Settings’ on your mobile device and select WiFi. Enable Wi-Fi on your smartphone
or tablet and search for the camera’s wireless AP signal - DVR914HD_xxxxxx. Tap this
network name to select your action camcorder’s Wi-Fi network connection. You will be
prompted for the first time to join the network and enter a password to the network (see
note below). When connected successfully, a check appears by the camcorder’s selected
Wi-Fi network on your smartphone or tablet.
The camcorder’s red LED Wi-Fi light stops blinking to indicate the successful connection.
The camcorder’s LCD screen displays the following details: ‘SSID:DVR914HD_xxxxxx,
Password and Wi-Fi Device Connected with the name of your connected device’.
NOTE: The first time connecting to the camcorder，you need to enter the following
password: “1234567890”.
3. Launch the application:
Tap the Vivitar Action Cam application icon on the Home Screen or from the App
list of the smartphone or tablet to open it. Now you can preview images from your phone,
from your camera and use your mobile device to control the camcorder settings and
capture your images.
To Next Page
Loading...
