FREQUENCY
(Accessed via Settings)
The ‘Frequency’ options represent the frequency of the electrical
current in fluorescent lighting sources in your locale. If your
camera is set to a frequency that does not match your country’s
electric current, you may see waves on the images taken by your
camera.
The Frequency options include:
50Hz – UK, Europe and Australia
60Hz – US, Canada and South America
The Time-lapse options allow you to specify the type, interval and
duration of the time-lapse video capture. The Time-lapse options
include:
Time-lapse type: Time-Lapse Frames, Video
Time-lapse interval: 5s, 10s, 30s, 1m
Time-lapse duration: 5m, 10m, 15m, 20m, 30m ,1hr
You can use the Format Camera to delete all of the content that is
currently on your camera’s memory card.
Keep in mind that formatting the memory card will permanently
delete all of the content on your camera’s memory card.
This option will delete all of the content at one time. If you would
like to delete individual images, use the delete option in the
Playback mode. Please ensure you have backed up your images
before you attempt this.
- To format the camera’s memory card tap OK. All captured
images will be deleted.
- To exit without formatting the memory card, tap Cancel.
To Next Page
Loading...
