INSTALLING THE HELMET MOUNTING SYSTEM
Using Your Action Camcorder
POWERING ON YOUR CAMCORDER
1. Press and hold the POWER button for about 3 seconds to turn on the camcorder.
The LCD screen briefly displays the ‘Vivitar’ screen and opens to the Video Capture
Mode.
2. Press and hold the POWER button again for about 3 seconds to turn the power off.
The LCD screen briefly displays ‘Goodbye’ and then powers off.
CHANGING CAMCORDER MODE
CAMCORDER MODES
1. Video Capture Mode (standard) - Use this mode to capture videos with your camcorder.
2. Video Capture Mode (Car Carrying) – Use this mode to capture videos in motion with
your camcorder.
To Next Page
Loading...
